Stair Railing Contractor in Oklahoma City

Updated October 2026 · Metal Contractors, Oklahoma City

A stair railing contractor designs, fabricates and installs the handrails and guards on stairs, landings, ramps and balconies, making sure they meet building code, carry the required loads and fit the look of the building. For commercial and industrial properties in Oklahoma City, that usually means steel or aluminum railings built to the International Building Code (IBC), welded or bolted to the structure and finished to stand up to Oklahoma weather.

Railings are easy to overlook until an inspector, an insurance auditor or an accident brings them into focus. This guide explains what a stair railing contractor actually does, the code dimensions that matter most on commercial stairs, the materials and finishes we use, and how to pick the right contractor for your project.

What Does a Stair Railing Contractor Do?

A good stair railing contractor handles the full path from measurement to final inspection:

  • Site survey. Measuring stair runs, landings, rise, nosings, walls and the structure the railing will attach to.
  • Design and shop drawings. Laying out posts, rails, infill, returns and extensions, and showing how each piece connects.
  • Code review. Checking heights, openings, graspability and extensions against the code edition that applies to the project.
  • Fabrication. Cutting, bending and welding steel or aluminum in the shop.
  • Finishing. Galvanizing, powder coating or painting the railing for its environment.
  • Installation. Anchoring posts to concrete, steel stringers or framing, and welding or bolting sections in place.
  • Inspection support. Working with the general contractor, architect and inspector to close out the work.

On a commercial project, the railing contractor often works alongside a steel erector, a concrete contractor and a general contractor. Clear coordination keeps posts out of the wrong places and avoids last-minute field fixes.

Handrails vs. Guards: Know the Difference

People use “railing” for everything, but the code treats handrails and guards differently.

  • A handrail is the rail you grab while walking up or down a stair. It is about graspability and continuous support.
  • A guard (often called a guardrail) is the barrier that keeps people from falling off an open side of a stair, landing, balcony or mezzanine.

Many commercial stairs need both. On an open-sided stair, the guard runs along the open side at guard height, and a separate handrail is mounted at handrail height on the guard or wall.

Commercial Stair Railing Code Basics (IBC)

Your stair railing contractor should know the IBC sections that govern stairs, handrails and guards. The International Code Council publishes the 2021 International Building Code, and its Chapter 10, Means of Egress, sets the key stair, handrail and guard dimensions (ICC, 2021 IBC Chapter 10: Means of Egress). Typical commercial requirements include:

Handrail Requirements

  • Handrail height: 34 to 38 inches, measured vertically (IBC §1014.2).
  • Number of handrails: two on commercial egress stairs (IBC §1011.11).
  • Circular handrail diameter: 1-1/4 to 2 inches (IBC §1014.3.1). Non-circular shapes follow different rules.
  • Clearance to the wall: at least 1-1/2 inches (IBC §1014.7).
  • Top extension: 12 inches horizontally beyond the top riser (IBC §1014.6).
  • Bottom extension: the depth of one tread beyond the bottom riser, sloped (IBC §1014.6).

Guard Requirements

  • Guard height: at least 42 inches for commercial stairs (IBC §1015.3), with lower heights allowed in some residential occupancies.
  • Openings: guards generally cannot let a 4-inch sphere pass from the walking surface up to the required guard height, and from 36 to 42 inches high the limit is a 4-3/8-inch sphere (IBC §1015.4).
  • Bottom gap: the triangular opening at the stair formed by the riser, tread and bottom rail generally cannot pass a 6-inch sphere (IBC §1015.4).

Industrial Stairs Are Different

The IBC also allows larger guard openings (a 21-inch sphere) in areas not open to the public in Group F, H, S and I-3 occupancies, and at elevated walking surfaces used to reach electrical, mechanical or plumbing equipment (IBC §1015.4). Factories, warehouses and other workplaces may also fall under OSHA’s walking-working surfaces rule, which sets its own criteria, such as a 42-inch minimum height for stair rail systems installed on or after January 17, 2017 (OSHA 29 CFR 1910.29). A stair railing contractor should confirm which set of rules applies before fabrication.

Always Confirm the Local Code Edition

Code editions, local amendments and project specs can change details. Your contractor should design to the code edition adopted by the City of Oklahoma City or the jurisdiction where the building sits, and to the architect’s drawings, not to a generic summary.

Before any metal is cut, it also helps to settle who owns each decision. The architect or engineer of record typically sets the design intent, the railing contractor turns that intent into shop drawings, and the building official reviews the finished work during inspection. When those roles are clear on day one, questions about heights, openings or attachment details get answered on paper instead of in the field, where changes take more time.

Metal Options for Stair Railings

Metal is the standard for commercial stair railings. Each option has trade-offs.

Carbon Steel

The most common choice for commercial and industrial stairs. Steel is strong, easy to weld and economical. It needs a protective finish because bare steel rusts, especially outdoors.

Galvanized Steel

Steel that is hot-dip galvanized after fabrication gains a zinc coating that resists corrosion. It is a strong choice for exterior stairs, loading docks and parking structures. Galvanized steel can also be powder coated for color, though that process needs proper surface prep.

Aluminum

Lightweight and naturally corrosion resistant. Aluminum railings are popular for exterior balconies and stairs where weight and rust are concerns. Aluminum is not as stiff as steel, so post spacing and connections matter.

Stainless Steel

Used where appearance and corrosion resistance are top priorities, such as lobbies, hospitals, food facilities and modern architecture. Stainless costs more and requires skilled fabrication.

Mixed Materials

Steel frames with glass, cable or perforated metal infill are common in offices and retail spaces. Infill must still meet the opening rules and load requirements for guards.

Finishes That Hold Up in Oklahoma

Oklahoma City railings face sun, rain, ice, hail and wide temperature swings. The finish matters as much as the metal.

  • Powder coating. Durable color finish baked onto the metal. It holds up well indoors and outdoors when prep is done right.
  • Galvanizing. Best for exterior steel exposed to moisture, de-icers or standing water.
  • Galvanizing plus powder coat (duplex). Combines corrosion protection with color for exterior railings that need a specific look.
  • Industrial paint systems. Primer and topcoat systems for interior or touch-up work, and for existing railings that need refinishing.

Ask your stair railing contractor what finish they recommend and why, and how touch-ups will be handled after installation.

Oklahoma City Conditions That Affect Exterior Railings

Exterior railings in the Oklahoma City metro deal with a few recurring problems.

  • Freeze-thaw at post bases. Water that collects around posts set in concrete can freeze, expand and crack the concrete over time, loosening the post. Detailing the base so water drains away, and sealing core-drilled holes properly, helps.
  • De-icers on steps and ramps. Salt and de-icing products used in winter speed up corrosion on steel. Galvanized or duplex finishes are often worth it on exterior stairs that get treated.
  • Sun and heat. Strong summer sun can fade some finishes and makes dark metal hot to the touch. Finish color and handrail placement both matter on stairs in full sun.
  • Wind-driven rain and storms. Exposed balconies and stairs take a lot of weather. Regular inspection of welds, fasteners and finish after storm season catches small problems before they turn into replacements.

Planning for these conditions at the start costs less than repairing rust and loose posts a few years later.

Common Railing Problems We Fix

Many calls we get are for existing railings that no longer pass or no longer feel safe.

  • Loose posts. Anchors pull out of cracked or spalled concrete, or bolts loosen over time.
  • Rust at the base. Water sits at post bases, rusting steel from the bottom up.
  • Wrong height. Older stairs may have handrails or guards that do not match current code for a renovation.
  • Openings too large. Older guards with wide spacing between pickets may not meet current guard opening rules.
  • Missing extensions. Handrails that stop short at the top or bottom of the stair.
  • Ungraspable shapes. Large flat rails or decorative shapes that are hard to grip.

When a building changes use, adds tenants or goes through a major renovation, these items often come up in plan review or inspection.

How a Stair Railing Project Usually Runs

Most commercial railing jobs follow a similar sequence. Knowing it helps owners and general contractors plan around fabrication lead times.

  1. Review drawings and specs. The contractor reviews the architectural and structural drawings, the railing details and any finish requirements.
  2. Field measure. Once stairs, landings and embeds or attachment points are in place, the contractor measures actual conditions. Built conditions rarely match drawings exactly, so field measurements drive the shop drawings.
  3. Shop drawings and approval. Shop drawings go to the architect or owner for review. Questions about heights, extensions or connections get settled on paper, not on the stair.
  4. Fabrication. Rails, posts and infill are cut, bent and welded in the shop, then finished.
  5. Delivery and installation. Sections are set, anchored, welded or bolted in place, and field welds are touched up.
  6. Punch list and inspection. The contractor walks the work with the GC or owner, fixes punch items and supports the inspection.

Lead times vary with project size, finish and shop workload. Galvanizing and powder coating add steps, so build them into the schedule early, and confirm who is responsible for protecting finished railings once they are installed.

How to Choose a Stair Railing Contractor

Use this checklist when comparing bids.

1. Commercial Experience

Ask for examples of commercial or industrial railings the contractor has built. Residential railing experience does not always translate to commercial code and load requirements.

2. In-House Fabrication

Contractors with their own shop can control quality, schedule and changes. Ask where fabrication happens and who welds.

3. Shop Drawings

A professional stair railing contractor should provide shop drawings for approval before fabrication, showing dimensions, connections and finishes.

4. Code Knowledge

Ask how they confirm heights, openings and extensions. A good answer references the code edition and the project drawings.

5. Structural Connections

Ask how posts attach to the structure and whether connections are engineered when the project requires it.

6. Finish and Warranty

Ask what finish is included, how touch-ups are handled and what warranty covers.

7. Insurance and Safety

Confirm general liability and workers’ compensation insurance, and ask about their jobsite safety program.

8. Schedule and Coordination

Ask about lead times, how they coordinate with the GC and other trades, and how they protect finished railings during construction.

Stair Railing Projects We Build

Metal Contractors fabricates and installs railings for a range of commercial and industrial settings:

  • Egress stairs in offices, schools, churches and retail buildings
  • Exterior stairs at building entries, loading docks and parking structures
  • Mezzanine stairs and guards in warehouses and shops
  • Balcony and walkway guards on multi-story buildings
  • Ramp handrails for accessible routes
  • Railing repairs and replacements on existing buildings

About Metal Contractors

Metal Contractors is an Oklahoma City metal fabrication and installation company serving commercial, industrial and multifamily properties across the metro. We build structural steel, mezzanines, canopies, stairs, handrails and guards, with in-shop fabrication and field installation. Our team works with owners, general contractors and architects to deliver metalwork that meets code, fits the schedule and lasts.

Stair Railing Contractor FAQs

How tall should a commercial stair handrail be?

Typical IBC commercial requirements call for handrails 34 to 38 inches high, measured vertically from the stair nosings.

What is the guard height on commercial stairs?

Commercial guards are generally at least 42 inches high, with some exceptions in certain residential occupancies.

Do I need handrails on both sides of the stair?

Commercial egress stairs typically need handrails on both sides, with some exceptions in the code.

Can you repair an old railing instead of replacing it?

Often yes, if the existing railing can be brought up to the required height, openings and strength. A site visit tells you which option makes more sense.

Can glass or cable infill be used on commercial guards?

Often, yes, as long as the infill meets the guard opening and load requirements that apply to the project. The railing contractor should confirm the infill system and its attachment details on the shop drawings before fabrication.

How long does a commercial railing project take?

It depends on size, finish and lead time. Field measuring, shop drawing approval, fabrication and finishing all take time before installation begins. Ask your contractor for a schedule that shows each step.

Can a stair railing contractor work on an occupied building?

Yes, with planning. Installation can often be phased to keep at least one stair or route open, and welding work needs fire watch and protection of nearby finishes. Discuss access and hours before work starts.

Do railings need to be inspected after installation?

On permitted projects, railings are typically reviewed as part of the building inspection. After that, periodic checks of posts, welds and finishes help catch loose or corroded parts early.

What information should I have ready for a railing estimate?

Helpful items include architectural and structural drawings if they exist, photos of the stairs and landings, the approximate number of flights, whether the stair is interior or exterior, and any finish or color requirements. For existing railings, note what prompted the call, such as a failed inspection, loose posts or a renovation, so the contractor can focus the site visit.

Talk to a Stair Railing Contractor in Oklahoma City

If you are building new stairs, renovating a building or fixing railings that no longer pass, Metal Contractors can help. We will survey the stairs, review the code requirements, provide shop drawings and fabricate and install railings built for Oklahoma conditions. Call Metal Contractors at 405-925-1531 to schedule a site visit.

Worker using phone

Contact

Let's Get In Touch

Have a project in mind or questions? Contact Metal Contractors for a free consultation and learn how we can help. We look forward to working with you!